BJQKD - CHEVRON RPM DELO MOTOR OIL SAE 10W-30
- MSDS: BJQKD
- Manufacturer: CHEVRON ENVIRONMENTAL HEALTH CENTER INC
- Product Name: CHEVRON RPM DELO MOTOR OIL SAE 10W-30
- National Stock Number: 9150-01-227-8210
Product Identification
Product ID:CHEVRON RPM DELO MOTOR OIL SAE 10W-30
MSDS Date:12/11/1990
FSC:9150
NIIN:01-227-8210
MSDS Number: BJQKD
Responsible Party
RICHMOND, CA 94804
US
Emergency Phone: 800-457-2022 OR 415-233-3737
Info Phone: 800-582-3835
Cage: 0AHD1
Contractor
Telephone: 800-582-3835
Cage: 0AHD1
Ingredients
LUBRICATING BASE OIL (THE BASE OIL MAY BE MIXTURE OF
Fraction By Weight: >75%
OSHA PEL 5MG/CUM OIL MIST
ACGIH TLV: 5MG/CUM OIL MIST
ZINC ALKYL DITHIOPHOSPHATE
CAS: 68649-42-3
Fraction By Weight: <1.5%
ADDITIVES INCLUDING ZINK ALKYL DITHIOPHOSPHATE
Fraction By Weight: <25%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS SUBSTANCE IS NOT EXPECTED TO
CAUSE PROLONGED OR SIGNIFICANT EYE OR SKIN IRRITATION. THE SYSTEMIC
TOXICITY OF THIS SUBSTANCE HAS NOT BEEN DETERMINED. HOWEVER, IT
SHOULD BE PRACTICALLY NON-TOXIC TO INTERNAL ORGANS IF IT GETS ON
THE SKIN, INHALED, OR INGESTED.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:CHEVRON MSDS SPECIFICALLY STATES IN ITS SECTION
3 "IMMEDIATE HEALTH EFFECTS" THAT THE TOXICITY OF THIS SUBSTANCE
HAS NOT BEEN DETERMINED TO CAUSE PROBLEMS ON EYE CONTACT,AS SKIN
IRRITANT,ON DERMAL TOX ICITY,RESPIRATORY/INHALATION AND INGESTION
TRACTS.FURTHERMORE,THIS EVALUATION IS BASED ON DATA FROM SIMILAR
MATERIALS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:NO FIRST AID PROCEDURES ARE REQUIRED IF PRODUCT COMES IN
CONTACT WITH EYES, SKIN OR IS BREATHED. FOR PRECAUTIONARY MEASURES
COMPLETELY WASH EYES AND SKIN. IF SWALLOWED, GIVE WATER OR MILK TO
DRINK AND TELEPHONE FOR MEDICAL ADVICE. CONSULT MEDICAL PERSONNEL
BEFORE INDUCING VOMITING.IF MEDICAL ADVICE CANNOT BE OBTAINED,THEN
TAKE THE PRODUCT CONTAINER AND PERSON TO THE NEAREST MEDICAL
FACILITY.
Fire Fighting
Flash Point Method:COC
Flash Point:401F,205C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, ALCOHOL FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCB &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO CO NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE PRODUCTI
OF HAZARDOUS DECOMPOSITION PRODUCTS.
Accidental Release
Spill Release Procedures:STOP THE SOURCE OF THE LEAK OR RELEASE.CLEAN
UP RELEASES AS SOON AS POSSIBLE.CONTAIN THE LIQUID TO PREVENT
FURTHER CONTAMINATION OF SOIL,SURFACE WATER OR GROUNDWATER.CLEAN UP
SMALL SPILL WITH ABSORBEN T MATERIALS OR PUMPING ALSO REMOVE
CONTAMNTD SOIL.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. PROTECT
CONTAINERS FROM PHYSICAL DAMAGE.
Other Precautions:DO NOT USE PRESSURE TO EMPTY CONTAINERS OR EXPLOSION
MAY RESULT.DO NOT WELD, HEAT OR DRILL CONTAINER. RESIDUE MAY IGNITE
WITH EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY.
Exposure Controls
Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION IS NORMALLY
REQUIRE USE APPROVED RESPIRATOR IF AIRBORNE CONCENTRATIONS REQUIRE.
Ventilation:USE ADEQUATE VENTILATION TO KEEP THE AIRBORNE
CONCENTRATIONS OF THIS MATERIAL BELOW THE RECOMMENDED EXPOSURE
STANDARD.
Protective Gloves:NOT NORMALLY REQUIRED.
Eye Protection:NOT NORMALLY REQUIRED.
Other Protective Equipment:AVOID PROLONGED OR REPEATED CONTACT.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
AVOID PROLONGED OR REPEATED EXPOSURE. DO NOT GET ON SKIN OR IN EYES. DO
NOT BREATHE VAPORS OR MISTS.
Chemical Properties
HCC:V6
Spec Gravity:0.88
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, LIGHT BROWN LIQUID WITH RED BLOOM
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,PEROXIDES.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN PRODUCE
CARBON MONOXIDE. NORMAL COMBUSTION FORMS CARBON DIOXIDE AND OXIDES
OF SULFUR.
Disposal
Waste Disposal Methods:PLACE CONTAMINATED MATERIALS IN DISPOSABLE
CONTAINERS AND DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS. CONTACT LOCAL
ENVIRONMENTAL OR HEALTH AUTHORITIES FOR APPROVED DISPOSAL OF THIS
MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.